Training Workshop: 3D Printing and Laser Cutting
| Course code: | 25-SS-208 |
|---|---|
| Dates: | April 22-24, 2025 Alternate Course Dates |
| Meets: | Tu and Th from 8:00 AM to 9:15 AM, 2 sessions |
| Hours: | 2.50 |
| Location: | VCU Engineering Research Building (ERB) Maker Studio |
| Instructor: | Boris Solomonov |
| Fee: | $50.00 |
Description
All participants must complete the Online Makerspace Orientation and General Safety Training Module before enrolling.
This training workshop provides you with the fundamentals of 3D printing through easy examples to get you started printing from scratch! You will look at laser cutting designs and learn how to deal with specific constraints. You will learn about parametrically, a powerful method of 3D modeling which demonstrates how you can be an efficient and effective 3D modeler. This course is perfect if you are interested in either 3D printing and/or laser cutting.
Objectives:
- Proper machine safety associated with 3D printing and laser systems.
- Students will learn and understand appropriate use of 3D Printers and Laser Systems.
- The module will give an introductory overview of 3D printers and laser systems.
- Students will demonstrate appropriate use of equipment at the conclusion of this module.
Notes
Both classes must be attended.Coupon Code: Any available coupon codes must be used/applied at the time of enrollment, cannot be combined with other discounts/coupons or waivers, and will not be retroactively applied. To verify or obtain your coupon code, please email egrmakers@vcu.edu
Cancellation/Refund Policy: You may cancel your registration up until two weeks prior to the course start date, and receive a full refund minus any credit card processing fees. After that date, no refunds will be given. Cancellations must be received via email at ocpe@vcu.edu
In the unlikely event that this program is cancelled or postponed due to insufficient enrollments or unforeseen circumstances, the university will fully refund registration fees, but cannot be held responsible for any other expenses, including change or cancellation charges to include but not limited to airlines, hotels, travel agencies, or other organizations.
Transfer Policy: Registration may be transferred to a different offering if space is available. Transfer request must be in writing via email at ocpe@vcu.edu by the cancellation deadline. The participant must meet all prerequisites or qualifications.
Questions? Should you have any questions about this noncredit offering, please contact Shelly Schuetz at ssschuetz@vcu.edu
As part of our commitment to maintaining a safe and secure environment in the VCU College of Engineering Makerspace Training and Equipment Areas, we would like to remind all students to adhere to the following attire guidelines. These guidelines are in place to ensure the safety of all participants while working in the lab space:
- Wear approved safety glasses/goggles: Protective eyewear is mandatory to safeguard against potential hazards in the Makerspace.
- Long Pants: Appropriate leg coverage is required for everyone in the space. Avoid shorts, skirts, capri pants, or any lower-body coverings that leave skin exposed.
- Covered Shirt: A shirt that covers the stomach and lower back is necessary. Tank tops or cropped shirts are not permitted.
- Closed-toe and Closed-back Shoes: Shoes that completely cover the foot with closed toes and backs are mandatory. Avoid shoes with cut-outs or vents that leave the skin exposed and unprotected.
These guidelines are crucial for the well-being of all individuals in the lab space, and we appreciate your cooperation in ensuring a safe and productive environment. Failure to adhere to these guidelines may result in restricted access to the Makerspace.
Additional Tips for Proper Lab Attire in the VCU College of Engineering Makerspace:
- Hair Safety: Ensure that any long hair is tied back or confined to prevent interference with lab/studio equipment and potential safety hazards.
- Foot Attire: Sandals with socks are not considered appropriate foot attire in the lab. Closed-toe and closed-back shoes are essential for the safety of individuals working in the Makerspace.
- Jewelry Removal: It is recommended that anyone working in undergraduate laboratories remove jewelry. This precaution helps prevent the collection of chemicals, contact with electrical sources, catching on laboratory equipment, and/or damage to the jewelry itself.
- VCU Makerspace Safety Rules and Regulations: Refer to the VCU Makerspace Safety Rules and Regulations Facility Agreement for comprehensive requirements. This agreement is available in the required online Makerspace Orientation and General Safety Training course.
- Adherence to Safety Rules: Follow makerspace safety rules and regulations at all times to maintain a secure working environment.
- Certified Makerspace Staff Instructions: Any additional guidelines, instructions, and/or rules provided by certified makerspace staff members must be followed diligently.
Student/Participant Conduct:
Participants are subject to all university policies applicable to students, unless a specific university or VCU Continuing and Professional Education policy explicitly states otherwise. University policies governing students are available at https://vcu.public.doctract.com including:
Student Code of Conduct
Honor System and Standards of Academic Conduct
Preventing and Responding to Discrimination
Title IX Sexual Harassment Policy-Interim
Sex-Based Misconduct Policy-Interim
For Academic Accommodations, please visit https://ocpe.vcu.edu/courses/policies.html#accommodations
There are still openings remaining at this time.
